EN
AB1101EN_SA
Rev. 01 / 11.2022
37/45
24.3 Autoclaving
The following accessory can be autoclaved at 121°C / 250°F (20 min):
Swing-out rotors without hangers
Reductions
No statement can be made about the degree of sterility.
Autoclaving accelerates the ageing process of plastics. In addition, autoclaving may discolour plastics.
24.4 Centrifuge
containers
With leakiness or after the breakage of centrifuging containers broken container parts, glass splinters and leaked
centrifugation material are to be completely removed.
The rubber inserts as well as the plastic sleeves of the rotors are to be replaced after a glass breakage.
Remaining glass splinters cause further glass breakage!
If this concerns infectious material, a disinfection process is to be executed immediately.
