Hettich EBA 280, Руководство по эксплуатации

Страница: 27 / 45

EN
AB1101EN_SA Rev. 01 / 11.2022 27/45
START
PULSE

Press the key to save the setting.
PROG t/min:s RPM
PROG t/min:s RPM

STOP
OPEN

Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU ".
PROG t/min:s RPM
Example:
PROG t/min:s RPM
20.3 Optical signal after ending the centrifugation run
The backlighting of the display flashes after the centrifugation run to visually signalize that the centrifugation run has
finished.
The optical signal can be switched on or off when the rotor is at a standstill:
The procedure can be aborted at any time by pressing the
STOP
OPEN key.

Press and hold the button for eight
seconds.
PROG t/min:s RPM


Press the key until the following is
displayed:
PROG t/min:s RPM

START
PULSE

Press the key.
PROG t/min:s RPM PROG t/min:s RPM


Press the key until one of the following is
displayed:
End blinking : Backlighting of display
flashes after the centrifugation run.
off : Backlighting does not flash.
on : Backlighting flashes.
PROG t/min:s RPM PROG t/min:s RPM


With the keys, set off or on .
PROG t/min:s RPM PROG t/min:s RPM

START
PULSE

Press the key to save the setting.
PROG t/min:s RPM
PROG t/min:s RPM

STOP
OPEN

Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU ".
PROG t/min:s RPM
Example:
PROG t/min:s RPM