Hettich CADRO, Техническая информация

Страница: 23 / 47

22 | 23
CLICK !
72 mm
32 mm
9 mm
18 mm
A
B
20,5
22,5
B
82796.****
83149.****
83093.****
A
20,5
max. 200 mm
1
4 3
2
3 2
1
3
7
32
Drawers with Hettich guiding rail Actro YOU/ Actro 5D.
Assembly of the basic profile.
In order to integrate the basic profile for drawer guidings rails into
the CADRO frame system, it is advisable to place a connector at the
lower profile connection position
B
. Thus, a stabilizing cross profile
can also be integrated at this position.
1
Fixing at the upper position
A
is done using the connecting arm
83093.**** which is screwed into a 4 mm core bore. The basic profile
is provided with holes for the ususal M5 grub screws being drilled at the
specified distances …
2
… and then being fixed by screwing.
3
Another possibility to connect the profiles without connecting nodes is
the use of the universal connectors (see page 24) .
Attaching the guiding rail.
The basic profile , order no. 9 298 806 / 9 298 807, is perfectly adapted
to the Hettich drawers. It is provided with a groove, on which the
predrillings for mounting the
runners “Actro YOU/Actro 5D”
precisely can be placed.
1
For drawers with offset fronts the first drilling position is to be
placed at a 37 mm distance (measured from the front edge of the
carcass). In case of inset fronts, the position is shifted backwards
according to the thickness of the front. The number and position of
the drillings depends on the depth of the respective drawer and its
planned load capacity. In order to connect the Actro
runner to the
CADRO drawer profile, we recommend the use of a M5 x 11 mm
countersunk head screw
Ø 3,6 x 8 mm, order no. 9 217 435 . Predrilling
of the profile with Ø 3,5 mm .
2
The guiding rails are exactly mounted and to attach the cover profile
order no. 9 298 808 / 9 298 809 (one-sided covering) or order no. 9 298 810 /
9 298 811 (two-sided covering) the top of the basic profile is provided with
the clip , order no. 9 304 915 . We recommend the use of one clip after every
20 cm.
3
Now the required cover profile can be firmly clipped on to hide the
guiding mechanism.
4
To cover one side of the basic profile, the cover profile
order no.
9 298 808 / 9 298 809 is used. Two-sided covering ist provided by the profile
order no. 9 298 810 / 9 298 811.
72 mm
32 mm
9 mm
18 mm
A
B
B
Basic profile for Hettich drawer
83149.****
Cover profile
9 298 808 / 9 298 809
to cover
one side
Cover profile
9 298 810 / 9 298 811
to cover
two sides
CADRO Base.
82796.****
Threaded pin
M5 x 6 mm
82918.****
Universal connector
82937.****
83149.****
83093.****
A
B
A
countersunk screw
Ø 3,6 x 8 mm
9 217 435