Hettich CADRO, Техническая информация

Страница: 13 / 47

12 | 13
3
1
2
5
4
6 7
2x
2x
Assembly.
Tools.
All you need to assemble the basic frame is a 2,5 mm Allen key or,
better still, a cordless screwdriver with the appropriate bit. When
using a cordless screwdriver, the torque lock should be set to
0,8-1 Nm (e.g. for the Makita HP331D level 12/screws).
Order of assembly.
1
The assembly is quite simple: The prepared profiles are inserted into
the connectors and linked to one another by tightening the grub screw.
During the assembly, take care that the screws are placed in a well hidden
or non-visible area.
It is important, as described in steps
2
–
6
, to assemble modules
that afterwards are inserted into one another and then screwed together.
Cleaning.
7
As a result of the processing, e.g. traces of grease or slight surface da-
mages may appear on the frame. These residues are now being removed
with a microfiber cloth and cleaning agent (e.g. Normfest Topas intensive
window cleaner). Remaining residues can also be removed with a rubber
eraser (we use Schleiffix from Kingsporn with a grain size of 240).
2x
CADRO Base.