Hettich CADRO, Техническая информация

Страница: 22 / 47

22 | 23
CLICK !
72 mm
32 mm
9 mm
18 mm
A
B
20,5
22,5
B
A
max. 200 mm
1
4 3
2
3 2
1
3
7
32
1
Fixing at the upper position
A
is done using the connecting arm
order no. 9 303 956, which is screwed into a 4 mm core bore. The basic
profile is provided with holes for the ususal M5 grub screws being drilled at
the specified distances …
2
… and then being fixed by screwing.
3
Another possibility to connect the profiles without connecting nodes is
the use of the universal connectors (see page 24) .
Attaching the guiding rail.
The basic profile 83149.**** is perfectly adapted to the Hettich drawers.
It is provided with a groove, on which the predrillings for mounting the
guiding rails “Actro YOU/Actro 5D” precisely can be placed.
1
For drawers with offset fronts the first drilling position is to be
placed at a 37 mm distance (measured from the front edge of the
carcass). In case of inset fronts, the position is shifted backwards
according to the thickness of the front. The number and position of
the drillings depends on the depth of the respective drawer and its
planned load capacity. In order to connect the Actro guiding rail to
the CADRO drawer profile, we recommend the use of a M5 x 11 mm
countersunk head screw.
2
The guiding rails are exactly mounted and to attach the cover profile
83150.**** (one-sided covering) or 83151.**** (two-sided covering) the
top of the basic profile is provided with the clip 83177.****. We recom-
mend the use of one clip after every 20 cm.
3
Now the required cover profile can be firmly clipped on to hide the
guiding mechanism.
4
To cover one side of the basic profile, the cover profile 83150.****
is used. Two-sided covering ist provided by the profile 83151.****.
72 mm
32 mm
9 mm
18 mm
A
B
B
Basic profile for Hettich drawer
9 298 806 / 9 298 807
Cover profile
83150.****
to cover
one side
Cover profile
83151.****
to cover
two sides
CADRO Base.
Drawers with Hettich
runner
Actro YOU / Actro 5D.
Assembly of the basic profile.
In order to integrate the basic profile for drawer guidings rails into
the CADRO frame system, it is advisable to place a connector at the
lower profile connection position
B
. Thus, a stabilizing cross profile
can also be integrated at this position.
9 298 833 /
9 298 834
Threaded pin
M5 x 6 mm
9 298 859 /
9 298 960
9 298 806 /
9 298 807
9 303 956
A
B
20,5
Universal connector
9 298 862
A