HETRONIC CS 434, Инструкция по эксплуатации и установке

Страница: 13 / 32

2.2. Control elements
Please refer to the transmitter and receiver diagram included with these
operating instructions for the control element arrangement of your radio remote
control system. The diagram forms an integral part of these operating
instructions.
The following is a description of those control elements that are standard on
HETRONIC radio remote control systems.
2.3. Operation
Before you use the system, you must carry out the safety checks described in
sections 2.3.1. and 2.3.2. below.
These safety checks must be carried out at least once each day before you start
using the system or before each change of shift.
A diagram of your transmitter version is included with these operating
instructions. The diagram forms part of the operating instructions. The
arrangement of the control elements and the transmitter labeling will vary
subject to customer requirements, but generally will be the same as the
labeling of the previous controls. The only essential difference, in fact, is
that you will now be able to exert control without the need for cable
connections.
Refer also to the manufacturer's operating instructions for your
machine and the diagram of your transmitter version to familiarize
yourself with the arrangement of the control elements and their
functions!
The section below deals with the radio remote control system’s control elements
and special features.
Risk to life and property!
Check the EMERGENCY STOP function each time
before use as described in the manufacturer’s
manual.