Page 1
HERZ Wireless control system
Important
Before starting work, the installer should carefully read this Installation & Operation Manual and make sure all instructions
contained therein are understood and observed. The thermostat should be mounted, operated and maintained by
specially trained personnel only. Personnel in the course of training are only allowed to handle the product under the
supervision of an experienced fitter. Subject to observation of the above terms, the manufacture shall assume the
liability for the equipment as provided by legal requirements. All instructions in this Installation & Operation Manual
should be observed when working with the controller. Any other application shall not comply with the regulations. The
manufacturer shall not be liable in case of an incompetent use of the control. Any modifications and amendments are
not allowed for safety reasons. The maintenance has to be performed by service companies or the manufacturer only.
The functionality of the controller depends on the model and equipment. This installation leaflet is part of the product
and has to be obtained.
Application
•
The thermostats are developed to control and manage all type of electrical heating systems or materials.
•
The controllers are designed for the use in residential rooms, office spaces and industrial facilities.
•
Verify that the installation complies with existing regulations, to ensure the proper use of the product.
Safety instructions
The thermostats have to be installed in dry places, as they are not resistant to spray or dripping water. A confusion of
the 230 V connections leads to an increased lethal risk and can damage the thermostat device as well as other devices.
Room temperature regulation and radio receiver
datasheet
Roomtemperature thermostat,
Issue 0419
Table of content
•
Digital wireless control system with 7 day timer (3
F799
06).................................................................................2
•
Analogue wireless control system (3
F799
04)...................................................................................................19
•
Receiver (for
3
F799
06
und
3
F799
04)............................................................................................................21
