Herth+Buss 95950004, Руководство по эксплуатации

Страница: 27 / 60

Operating Instruction 95950004
27
EN
the NEGATIVE (BLACK) clip from the bat-
tery charger to the NEGATIVE (NEG, N,
-) ungrounded post of the battery. Con-
nect the POSITIVE (RED) clip to the ve-
hicle chassis or engine block away from
the battery. Do not connect the clip to the
carburetor, fuel lines or sheet-metal body
parts. Connect to a heavy gauge metal
part of the frame or engine block.
5.7 Connect charger AC supply cord to elec-
trical outlet and press to turn the
output on.
5.8 When disconnecting the charger, press
to turn the output off, disconnect
the AC cord, remove the clip from the
vehicle chassis and then remove the clip
from the battery terminal.
6. Follow these steps when
battery is outside vehicle
WARNING
A SPARK NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE RISK
OF A SPARK NEAR THE BATTERY:
6.1 Check the polarity of the battery posts.
The POSITIVE (POS, P, +) battery post
usually has a larger diameter than the
NEGATIVE (NEG, N, -) post.
6.2 Attach at least a 24-inch long 4 gauge
(AWG) insulated battery cable to the NE-
GATIVE (NEG, N, -) battery post.
6.3 Connect the POSITIVE (RED) charger clip
to the POSITIVE (POS, P, +) post of the
battery.
6.4 Position yourself and the free end of the
cable you previously attached to the NE-
GATIVE (NEG, N, -) battery post as far
away from the battery as possible – then
connect the NEGATIVE (BLACK) charger
clip to the free end of the cable.
6.5 Do not face the battery when making the
final connection.
6.6 Connect charger AC supply cord to elec-
trical outlet and press to turn the
output on.
6.7 When disconnecting the charger, press
to turn the output off, disconnect the
AC cord, remove the clip from the cable
attached to the negative battery terminal
and then remove the clip from the positive
battery terminal.
6.8 A marine (boat) battery must be removed
and charged on shore. To charge it on-
board requires equipment specially desi-
gned for marine use.