background image

HermanMiller

Assembly Instructions

3

1BPGDV rev C

Shared Leg Bracket

(FK2E3)

Shared Leg

(FK2E3)

#10 Pan Head Sheet 

Metal Screw

Desk in Series

1.1 Attach Shared Leg Brackets to Shared Legs with (6) #10 Pan Head Sheet 

Metal Screws per leg.

Step 1

Step 2

Work Surface (FKS10)

End Leg Assembly (FK2E3)

Step 3

3.1  See step 2 above for proper stiffener installation onto Work Surface. 
3.2 Place Leg Assembly onto Work Surface.  Shared leg should straddle work 

surfaces.
3.3  Drill pilot holes into work surface.
3.4  Secure Leg Assembly to Work Surface with (3) #14 Pan Head Screws.

Shared Leg Assembly

(FK2E3)

#14 Pan Head Screw

Modesty Panel

(FK700)

Pan Head Sheet 

Metal Screw

Step 4

2.1  Assemble End Leg and Shared Leg to Modesty Panel with (8) Pan Head 

Sheet Metal Screws.  
Note:  There should be 1” gap between bottom of modesty panel and floor.

1.00”

4.1  Place Shared Leg Assembly or End Leg Assembly (shown) onto next Work 

Surface.  Pre-drill pilot holes in surface.
4.2  Secure Leg Assembly to Work Surface with (3) or (6) #14 Pan Head 

Screws.

Leg Assembly

(FK2E3)

#14 Pan Head Screw

Work Surface (FKS10)

Содержание Canvas Office Landscape Metal Desk










Отзывы: