HermanMiller Canvas Office Landscape Metal Desk, Инструкции по установке и разборке для последующей утилизации

Страница: 9 / 9

HermanMiller Assembly Instructions 9
1BPGDV rev C
Step 8
8.1 Align 12” Shared Peninsula Leg to End Leg
- Verify no gap between 12” Shared Peninsula Leg and End Leg.
8.2 Shift Leg/Modesty Assembly and Peninsula Work Surface
within the slots to achieve no gap conditions.
Step 10
10.1 Attach remaining #14 screws to secure 12” Shared
Peninsula Leg to Main Metal Desk Work Surface (1/8” pilot holes
recommended).
No gap
12” Shared
Leg
(FK2E3)
End Leg
(FK2E3)
Step 9
9.1 While maintaining work surface flushness & no gap, attach the
FK29B Ganging bracket to the Peninsula Work Surface (1/8” pilot holes
recommended).
Ganging bracket
(FK29B)
Disassembly and Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non marked
components should be treated as mixed plastic. Ferrous metals can be
identified using a small magnet for recycling. Non-ferrous metals should be
separated and recycled separately.
To disassemble product, reverse the above installation steps.