Herculano G2ET 10000, Руководство пользователя

Страница: 13 / 34

HERCULANO – ALFAIAS AGRÍCOLAS, S.A
.
APARTADO 1 – 3720-051 Loureiro OAZ – Oliveira de Azeméis – Portugal
Tel.: (351)256 661 900 Fax: (351)256 692 497 e-mail:
dep.comercial.her@ferpinta.pt Internet: www.herculano.pt
11
6.1.
CONNECTION TO THE TRACTOR’S ELECTRICAL SYSTEM – PLUG
Follow the inspection procedure set out below for good performance and durability of the trailer’s
lighting and wiring system:
•
Clear all reflective components and all other lighting devices thoroughly.
•
Check that all bulbs are working correctly, and replace all blown or damaged bulbs, as well as
reflective elements in poor condition.
•
When replacing, always use bulbs with the same power, as well as the most appropriate
reflective components.
•
Inspect all cables and verify if they are damaged. Cables must be properly supported and
protected, and their connection plugs must be tight.
•
Any damaged cables must be replaced with new cables of the same dimensions, in order to
guarantee the connection of elements that they run to.
NOTE:
If you need to test bulbs, use a 12V DC power supply. Never use battery chargers or transformers.
PIN COLOUR CIRCUIT
1 BLUE / (GREEN*)
RIGHT INDICATOR LIGHT
•
OPTIONAL LED (GREEN)
2 WHITE (x2) MASS
3 “FREE” / (BLUE*)
•
OPTIONAL LED
4 YELLOW LEFT INDICATOR LIGHT
5 RED BRAKE
6 BROWN (x2) POSITION LIGHT
7 BLACK POSITION LIGHT
PLUG
(Cod: 20303001)
- Lighting system diagrams are shown on the exploded diagrams document: “Spare Parts List”,
which is sent with the User Manual.
WARNING!
Failure to take notice of this warning could lead
to damage to property, serious injury or death !