Heras HGD230, Руководство пользователя

Страница: 77 / 146

EN – Translation of the original user manual - 2.1 | 2019 77
7.11.4 Setting a short closing time
If a photocell is used you can set a shorter open dwell time after the photocell has
been interrupted.
•
Menu: "Service Menu", "Enter passw.": enter the password.
•
Menu: "Settings", "Set timer", "Secondary time": set to "xxx".
Example: If the time is pre-set at 5, a 5-second timer is started as soon as the
photocell is interrupted (signal active and inactive again) in automatic mode. This
timer causes the gate to be closed automatically again after 5 seconds.
This shortened auto closing timer of the gate is also activated even if the
light barrier is activated during OPEN travel of the gate. The original hold-
open time of the gate is only set again when the gate closes again and the
entrance of the light barrier remains inactive.
7.12 DISABLE CALENDAR FUNCTION
The programmed and active port functions in the controller's calendar can be
temporarily deactivated by hardware (switch). For this purpose, one of the inputs
In5 or In6 can be configured to deactivate the calendar functions or to ignore new
events when there is 24 volts. Contacts can also be connected to the backplane;
see appendix B and C.
One way to disable "calendar functions" on input In6 is as follows:
•
Connect a switch to input In6 and +24 Volt.
•
Menu: "Service Menu", "Enter passw.": enter the password.
•
Menu: „Settings“, „In/Outputs“, „In6“: set to „28“.
•
Exit menu and test function.
7.13 DISABLE AUTOMATIC CLOSING TIMER
To temporarily stop automatic closing from the OPEN or OPEN position gate, one
of the In5 or In6 inputs can be configured to deactivate the closing timers when
the 24 volts is present. Contacts can also be connected to the backplane; see
appendix B and C. For the In6 entrance, this is done in the following way:
• Connect a switch to input In6 and +24 Volt.
• Menu: "Service Menu", "Enter passw.": enter the password.
•
Menu: „Settings“, „In/Outputs“, „In6“: set to „29“.
•
Exit menu and test function.