Hensel-Visit Nova D 1200, Руководство пользователя

Страница: 32 / 64

Operating the device
32
To activate automatic model light economy mode (“Autored”), proceed as
follows:

Reduce the value shown on the display using the arrow buttons (1) or
(2) until two hyphens “--” appear on the display.
Setting the flash energy
The flash energy can be set in stages over a range of 8 f-stops from 3
(lowest flash energy) to 10 (highest flash energy) using the arrow buttons.
The set energy values from 3.0 to 10 are displayed on the right display. The
following figure shows an overview of the arrow buttons.
No.
Explanation
1
Reduce the value in increments of whole f-stops
2
Reduce the value in increments of 0.1 f-stops
3
Increase the value in increments of 0.1 f-stops
4
Increase the value in increments of whole f-stops