Hensel-Visit Nova D 1200, Руководство пользователя

Страница: 10 / 64

Safety
10

Where possible, avoid laying the cable on the ground. If laying on the
ground cannot be avoided, make sure the cables are not damaged by
vehicles or ladders.

Check the device annually for operating safety (see the maintenance
schedule on page 55).

Regularly clean the outside of the device with a dry cloth.

Have damaged cables and the device replaced immediately by the
authorized Customer Service only.
Electrical shock due to incorrect handling with defective flash tubes and
device
In the case of a defective flash tube, the electrodes could be exposed.
Touching the flash tube may result in an electric shock.

In case of a damaged flash tube, switch off the device immediately and
disconnect it from the power mains.

Disconnect the connection between the flash head and the device.

Always hereby observe the user manual for the flash head which is
utilized.
Prevention of serious injuries due to fire
When the flash tube is triggered, sparks might arise, which could lead to
fire. Serious injuries can result.

Do not use the device in the vicinity of flammable materials such as
decorative materials, paper, etc.

Do not store flammable materials such as decorative materials, paper,
etc. in the vicinity of the device.
Prevention of serious skin and eye injuries
Triggering a flash in the direct vicinity of the eyes can result in skin and eye
injuries.

Observe the required minimum distance for the type of light shaping
tool and flash intensity.

Do not look into the light shaping tool in case the flash is triggered
accidentally.

In case of skin or eye injuries, consult a doctor immediately.