Hensel-Visit Nova D 1200, Руководство пользователя

Страница: 36 / 64

Operating the device
36
Setting the flash energy symmetrically
Optionally, the flash energy can be set symmetrically for Channels A and B.
To set the flash energy symmetrically for Channels A and B, proceed as
follows:

To activate Channel A, press the A button (1).

To activate Channel B, press the B button (2).
The LEDs for maximum energy light up automatically.

Set the same flash energy using the arrow buttons (1, 2, 3, 4). The
values to be set symmetrically can be found in the table (refer to
Chapter “Setting the flash energy asymmetrically,” Page 37).

To deactivate Channels A and B, press the A (1) and B (2) buttons again
once time.
The corresponding LEDs next to the A (1) and B (2) buttons go out.