Hensel-Visit Nova D 1200, Руководство пользователя

Страница: 39 / 64

Operating the device
39
To deactivate the “Flash Check” function, proceed as follows:

Press the FC button again.
The LED display above the FC button goes out.
Activating and deactivating the “Audio” function
With the “Audio” function, flash readiness after charging or after a
reduction of the flash energy is indicated by an acoustic tone. To activate
the “Audio” function, proceed as follows:

Press the AUDIO button.
The LED display above the AUDIO button lights up green.
To deactivate the “Audio” function, proceed as follows:

Press the AUDIO button again.
The LED display above the AUDIO button goes out.
Synchronizing the device with the camera
The device and the camera are synchronized using the following
components:

Sync cord

Built-in photo cell

Built-in radio receiver
Synchronizing the device using the cable
To connect the device to the camera, proceed as follows:

Insert the jack plug of the sync cord (1) into the sync socket of the
device (2).

Connect the other end of the sync cord to the camera. Here, follow the
user manual of the camera.