manualshive.com logo in svg

Henny Penny OFG-391, Руководство оператора

Поделиться
Скачать
Henny Penny OFG-391 Скачать руководство пользователя страница 8

          Model OFG- 391

1-1. INTRODUCTION

The Henny Penny open fryer is a basic unit of food processing
equipment. This unit is used only in institutional and commercial
food service operations.

As of August 16, 2005, the Waste Electrical and Electronic Equip-
ment directive went into effect for the European Union.  Our
products have been evaluated to the WEEE directive.  We have
also reviewed our products to determine if they comply with the
Restriction of Hazardous Substances directive (RoHS) and have
redesigned our products as needed in order to comply.  To continue
compliance with these directives, this unit must not be disposed as
unsorted municipal waste.  For proper disposal, please contact
your nearest Henny Penny distributor.

1-2.    PROPER CARE

As in any unit of food service equipment, the Henny Penny
open fryer does require care and maintenance.  Requirements for
the maintenance and cleaning are contained in this manual and must
become a regular part of the operation of the unit at all times.

1-3.    ASSISTANCE

Should you require outside assistance, call your local independent
distributor in your area, or call Henny Penny Corp. at
1-800-417-8405 or 1-937-456-8405.

SECTION 1.    INTRODUCTION

1-1

                                                                                                                                          207

Содержание OFG-391







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды