Henny Penny OFG-391, Руководство оператора

Страница: 43 / 70

Model OFG- 391
3-15. PREVENTIVE Lubricating Lid Rollers - Annually
MAINTENANCE (Continued)
The lid rollers, in the back of the fryer, should be lubricated at
least once a year, to allow the lid easy movement.
1. Remove the back shroud of the fryer.
2. Using spindle lube, part number 12124, place a small amount
of lube on both top and bottom rollers. Make sure to lube
both left and right rollers.
Cleaning Blower Wheel - Annually
The blower wheel must be cleaned annually to ensure the unit
operates efficiently and without failures.
Make sure unit is off, and close and lock the lid.
Lid should be in locked down position. Failure to do so
could result in personal injury.
2. Remove the back shroud of the unit.
3. Remove the hose from the blower housing by sliding blower
tube out of the bracket. See photo at left.
4. Clean the fins of the blower wheel, using a brush or straight
blade screwdriver. Make sure the fins are clean of any debris.
Depending on the breading location and conditions within the
kitchen area, cleaning the blower wheel may need to be done
more frequently.
3-16. PROGRAMMING 1. Press and hold for one second until “PROG” shows
in the display, followed by “ENTER CODE”.
2. Enter code 1, 2, 3. “SELECT PRODUCT…PRESS
PROG” scrolls across the display.
If no buttons are pressed within approximately 2 minutes
while in the Program Mode, the controls will revert back
to the Cook Mode.
810 3-23