manualshive.com logo in svg

Henny Penny OFG-391, Руководство оператора

Поделиться
Скачать
Henny Penny OFG-391 Скачать руководство пользователя страница 4

          Model OFG- 391

This manual should be retained in a convenient location for future reference.

A wiring diagram for this appliance is located on the rear shroud cover of the control panel.

Post in a prominent location, instructions to be followed if user smells gas. This information
should be obtained by consulting the local gas supplier.

Do not obstruct the flow of combustion and ventilation air.  Adequate clearance must be left all
around appliance for sufficient air to the combustion chamber.

The Model OFG-391 open fryer is equipped with a continuous pilot.  But fryer can not be operated
with out electric power.  Fryer will automatically return to normal operation when power is restored.

Keep appliance area free and clear from combustibles.

Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.  FIRE OR
EXPLOSION COULD RESULT.

703

Содержание OFG-391







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды