Henny Penny OE-100, Техническое руководство

Страница: 6 / 51

1-2
Problem Cause Correction
Model OE-100
With switch in COOK Open circuit • Check to see if unit is plugged in.
position and switch
light not illuminated,
• Check breaker or fuse at supply
fryer is completely box.
inoperative (no power).
• Check control panel fuse per
Section 2-10.
• Check COOK/OFF/PUMP switch
per Section 2-9. Replace if defec-
tive.
• Check voltage at wall receptacle.
• Check cord and plug.
With switch in COOK Open drain valve • Close drain valve.
position switch light
is illuminated, but
Defective drain switch • Check drain switch per
all other lights are Section 2-11.
are extinguished.
Shortening will not Faulty contactor • Check contactor per Section 2-7.
heat but lights are
illuminated.
Faulty temperature probe • Check temperature probe per
section 2-4. "Error Message" E6.
Faulty high temperature limit • Check high temperature limit
per Section 2-5.
Heating of shortening Low or improper voltage • Using a voltage meter, check wall
too slow. receptacle voltage against the
rated voltage on data plate.
Weak or burned out elements • Check heating elements per
Section 2-6.
Points in contactor bad • Check contactor per Section 2-7.
Wires loose • Tighten wire connectors.
Burned or charred wire connection • Replace wire and clean connectors.
593