Henny Penny OE-100, Техническое руководство

Страница: 17 / 51

2-11
Model OE-100
2-12. FILTER HEATER
SWITCH
Checkout
The Filter Heater Switch is a rocker type switch. With the switch in the
"ON" position, the filter heater will operate, melting any solidified
shortening in the filter lines.
To avoid electrical shock or property damage, move the
power switch to “OFF” and disconnect main circuit breaker,
or unplug cord at wall receptacle.
1. Remove Control Panel, but leave hinged on unit.
2. Remove and label wires from the switch and check across from
top to bottom for continuity. With the switch in the "ON" position,
the circuit should be closed. If the switch is defective, replace it
by following the next step.
Replacement:
593
SHOCK HAZARD
3. Push in on tabs on the ends of the switch and pull switch from the
front of the control panel.
4. Replace new switch, replace wires, and install controlpanel.