Henny Penny OE-100, Техническое руководство

Страница: 22 / 51

2-16
Model OE-100
2-18. PUMP AND MOTOR
REPLACEMENT
To avoid electrical shock or property damage, move the
power switch to “OFF” and disconnect main circuit breaker,
or unplug cord at wall receptacle.
1. Remove the cover from the junction box and remove the wire
nuts attaching wires leading into the flexible conduit going to the
motor.
2. Loosen the two screws securing the flexible conduit going to the
motor.
3. Remove tubing to the pump.
4. Remove hardware attaching the motor to the motor hase bracket
and remove motor and pump assembly.
2-19. COOLING FAN
MAINTENANCE
The cooling fan on the OE-100A open fryer reduces the amount
of heat behind the panel, and if the heat does become excessive,
"E-4" will show on the display.
The PC boards on the control panels can be damaged by exces-
sive amount of heat so it is important that the cooling fan is
operating properly and has good air flow.
To prevent an "E-4" reading, which will shut the heat off to the
fryer, follow the following steps.
ONCE A MONTH:
1. Turn power switch to the "OFF" position.
2. Open door to bottom of fryer.
3. Locate metal fan guard situated in the left front, under the
control panel.
4. Clean any lint and dirt from fan guard.
294
SHOCK HAZARD