Henny Penny OE-100, Техническое руководство

Страница: 23 / 51

2-17
Model OE-100
2-19. COOLING FAN
MAINTENANCE
(Continued) 5. Close door and turn power switch on. Unit is now ready for
operation.
If the fan needs a more thorough cleaning, or E-4 persists after
cleaning the fan guard, follow the following steps.
1. With power on, open door to filter drain pan and look up at fan to
make sure fan is operating.
2. If fan is not operating, it needs replaced; if fan is operating con-
tinue onto step 3.
To avoid electrical shock or property damage, move the
power switch to “OFF” and disconnect main circuit breaker,
or unplug cord at wall receptacle.
3. Remove the screws securing decorative strips on both sides of the
control, and remove decorative strips.
4. Swing panel out to the left and locate fan on the left behind panel.
5. Thoroughly clean fan, plus check fan guard per above instruc-
tions.
6. Replace panel and decorative panels.
7. Restore power to unit and unit is now ready for operation.
294
SHOCK HAZARD