Henny Penny OE-100, Техническое руководство

Страница: 16 / 51

2-10
Model OE-100
2-10. FUSES
To avoid electrical shock or property damage, move the
power switch to “OFF” and disconnect main circuit breaker,
or unplug cord at wall receptacle.
Each unit is provided with two fuses to protect the internal circuitry.
These fuses are rated 15 amps at 300 volts. Unthread screw cap to
allow access to fuses located on panel behind door.
2-11. DRAIN SWITCH
To avoid electrical shock or property damage, move the
power switch to “OFF” and disconnect main circuit breaker,
or unplug cord at wall receptacle.
1. A continuity check should be made to determine if the drain
switch is defective. Check between the two outer terminals with
actuator in groove of the drain valve extension rod. Circuit should
be closed. If drain valve extension rod is turned, actuating drain
switch, circuit should be open.
Replacement
1. To replace drain switch, remove two screws and nuts securing
switch and switch cover.
2. Label and disconnect wires.
3. Connect wires to new drain switch.
4. Position actuator and attach drain switch and switch cover with
the two screws and nuts.
5. Test to see if drain valve extension rod actuates the switch.
Listen for click of switch while rotating drain valve rod.
1091
SHOCK HAZARD
SHOCK HAZARD