Henny Penny MPC-1L, Техническое руководство

Страница: 4 / 26

Model MPC-1L, MPC-22, MPC-554
ii Oct. 2018 FM06-038-B
These are the original version controlled Henny Penny instructions for Multipurpose Holding Cabinet
(MPC) Model MPC - 554, 1L, and 22. This manual is available on the Henny Penny Public website
(www.hennypenny.com). Read these instructions completely prior to installation and operation of
this appliance to ensure compliance to all required installation, operation and safety standards. Read
and obey all safety messages to avoid damage to the appliance and personal injury.
This appliance is intended for commercial use in kitchens of restaurants, bakeries, hospitals, etc. but
not for the continuous mass production of food such as in a factory setting. During use the units
airborne A-weighted emission sound pressure is below 70 db(A). All repairs must be performed by
the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Always use strain relief. Install the provided power cord with the ground wire dimensioned to fail last.
If the supplied power cord or an existing one becomes damaged, do not use it; rather, replace it with
a known good power cord.The power cord must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Proper daily, weekly, monthly, quarterly and yearly maintenance must be performed on this
appliance to ensure safe and continuous operation. This appliance must never be cleaned with a
water jet or steam cleaning tool. Cleaning brushes are shipped with the appliance and proper
cleaning instructions are included in this manual.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is not intended to be operated by means of an external timer or a separate remote
control system.
PREFACE:SAFETY AND COMPLIANCE