Henny Penny LVE-202, Техническое руководство

Страница: 51 / 115

39
5 5))
Connect a known good high limit control into wiring for the suspect
thermocouple and control.
6 6))
Connect electrical power and operate vat. If vat does not overheat, replace
defective control with known good part.
7 7))
If vat overheats, perform more checkouts of other components (relays,
contactors, probes, etc.) and replace the heating element as the last resort.
7 7..5 5..2 2 R Re ep plla acce em me en ntt
1 1))
Tag and remove lead wires to module.
2 2))
Using 3/8 inch socket, remove two nuts securing control to panel.
3 3))
Install a new control in reverse order.
7 7..6 6 E Elle eccttrriicc H He ea attiin ng g E Elle em me en nttss
The fryers are equipped with as few as two heating elements or as many as eight
elements. If one of the small elements in the middle needs replacement, one or two of
the elements must also be removed to gain access to the faulty element.
T Ta ab blle e 7 7--2 2 E Elle eccttrriicc H He ea attiin ng g E Elle em me en ntt C Ch he ecckko ou utt
Part
No.
Total
Watt
Per
Vat
Watt
Per
Heater
Voltage
System
Voltage
System
Wiring
Config.
Watts
Per
Square
Inch
Element
Resistance
Per
Element
(Phase to
Phase)
Element
Resistance
(Phase to
Neutral)
Color
Code
S Sp plliitt V Va att
84401-
001
7000 7000 N/A 208 VAC 3 Wire
WYE
37 11.77 N/A
Gree
n
84401-
002
7000 7000 230 400 VAC 4 Wire
WYE
37 N/A 21.59 Blue
84401-
003
7000 7000 277 480 VAC 4 Wire
WYE
37 N/A 31.32
Black