Henny Penny EEG-16X, Руководство оператора

Страница: 46 / 94

Operation
36
NOTE: “BULK OIL DISPOSE?” in the Special Program Mode or Set-Up Mode, must to
set to “YES” for the Bulk Oil Dispose System to operate. Also, a password code step
(1, 2, 3) can be added in Special Programming, SP-27.
2 2))
Press and hold either filter button until display shows “*FILTER MENU*”,
and “1.EXPRESS FILTER?”.
3 3))
Press and release the right arrow button twice until display shows “3.DISPOSE”.
Press “✓” button and display shows “DISPOSE?” “YES NO”, or enter code 1, 2,
3, if SP-27 is set to “YES”.
4 4))
Press “✓” button; “DRAIN VAT?” “YES NO” shows in display. Press “X” button if
drain pan has oil in it, Skip to step 9.
5 5))
Press “✓” button and display shows “OPEN DRAIN”. Pull out on drain knob to
open drain and display shows “DRAINING”. Oil drains from vat into drain pan.
6 6))
Display shows “VAT EMTY” “YES NO”. Verify that vat is empty, and press “✓”
button.
7 7))
Display shows “CLEAR OLD OIL FROM OIL LINES” “✓=PUMP” “X=DONE”.
Press and hold “✓” button for a few seconds to clear old oil from lines. Once
cleared, press “X” button.
8 8))
Display shows “CLN VAT COMPLETE” “YES NO”. Once vat is clean, press “✓”
button.
9 9))
Display shows “DISPOSE” and then “✓=PUMP” “X=DONE. Press “✓” button.
1 10 0))
Display shows “DISPOSING...” “X=STOP” and oil is pumped from drain pan to
bulk oil container. When all oil is pumped from pan, press “X” button.
1 11 1))
Display shows “DISPOSE” and then “✓=PUMP” “X=DONE. Press “X” button;
display shows “CLOSE DRAIN”. Close drain.
1 12 2))
Display shows “MANUAL FILL VAT” (or “FILL VAT FROM BULK” if equipped),
followed by “IS POT FILLED?”, along with “YES NO”. Fill the vat to the lower
indicator line on the rear of the vat. See
3.3 Filling Or Adding Oil, page 19 .
1 13 3))
Press “✓” button and fryer returns to normal operation.