Henny Penny EEG-16X, Руководство оператора

Страница: 45 / 94

Operation
35
7 7))
Display shows “CLEAR OLD OIL FROM OIL LINES” “✓=PUMP” “X=DONE”.
Press and hold “✓” button for a few seconds to clear old oil from lines. Once
cleared, press “X” button.
8 8))
Display shows “CLN VAT COMPLETE” “YES NO”. Once vat is clean, press “✓”
button and display shows “CLOSE DRAIN”. Push in on the drain knob.
9 9))
Display shows “MANUAL FILL VAT”, followed by “IS POT FILLED?” “YES NO”.
Fill vat to the lower indicator line on the rear of the vat. See
3.3 Filling Or Adding
Oil, page 19 . Press “✓” button and fryer returns to normal operation.
1 10 0))
Remove discard shuttle from under fryer and replace with the filter pan
assembly.
3 3..1 13 3..2 2 A Au utto o D Diisscca arrd d U Ussiin ng g O Oiill D Diisscca arrd d S Sh hu uttttlle e
1 1))
Open center door, pull the drain pan assembly from under fryer and replace with
oil discard shuttle.
2 2))
Press and hold either filter button until display shows “*FILTER MENU*”,
along with “1.AUTO FILTER?”.
3 3))
Press and release the down arrow button twice until display shows “3.
DISPOSE”. Press “✓” button and display shows “DISPOSE?” “YES NO”. (If
control suspects oil in drain pan “CAUTION IS THERE OIL IN PAN?” “YES NO”
may show in display. Make sure drain pan is empty before proceeding.)
4 4))
Press “✓” button and display shows “IS DISPOSAL UNIT IN PLACE?” “YES
NO”.
5 5))
With discard shuttle rolled into place, press “✓” button and display shows
“DRAINING”. Oil now drains from the vat into the shuttle.
6 6))
Display shows “VAT EMTY” “YES NO”. Verify that vat is empty, and press “✓”
button. Display shows “CLEAR OLD OIL FROM OIL LINES” “✓=PUMP” “X=
DONE”. To make sure no old oil remains in the oil lines, press and hold ✓ button
for a few seconds. Once lines are clear, press “X” button.
7 7))
Display shows “CLN VAT COMPLETE” “YES NO”. Once vat is clean, press “✓”
button.
8 8))
Display shows “MANUAL FILL POT” “IS POT FILLED?” “YES NO”. Fill the vat to
the lower indicator line on the rear of the vat. Press “✓” button and controls
return to normal operation.
9 9))
Remove the discard shuttle from under fryer and replace with the filter pan
assembly.
3 3..1 13 3..3 3 D Diisscca arrd d U Ussiin ng g B Bu ullkk O Oiill D Diissp po osse e S Syysstte em m
1 1))
Connect female quick disconnect attached to the hose at the rear of fryer, to the
correct male quick disconnect at the wall. Once attached, the hose can remain
connected unless the fryer is moved.