Henny Penny EEG-16X, Руководство оператора

Страница: 20 / 94

Installation
10
Disconnect power supply before a thorough cleaning or servicing the fryer.
2 2..1 10 0 M Mo otto orr B Be ea arriin ng gss
The electric motor bearings are permanently lubricated. DO NOT LUBRICATE.
2 2..1 11 1 L Liig gh httiin ng g & & S Sh hu uttd do ow wn n O Off T Th he e B Bu urrn ne errss
2 2..1 11 1..1 1 L Liig gh httiin ng g O Off T Th he e B Bu urrn ne errss
1 1))
Turn the power switch to the off position.
2 2))
Wait at least 5 minutes and then turn power switch to the on position.
3 3))
Press the heat button on the controls (left or right).
4 4))
The burner lights and operates in a Melt Cycle until the shortening reaches a
preset temperature.
5 5))
Once the display shows a product selection or a double dashes, press the
desired product button.
NOTE: The fryer is equipped with a ignition spark module which has a set ignition
safety time (TSA) of 90 seconds.
2 2..1 11 1..2 2 S Sh hu uttd do ow wn n O Off B Bu urrn ne errss
1 1))
Press either heat button on the controls.
2 2))
Turn the power switch to the off position.
NOTE: This turns off all vats.
2 2..1 12 2 T Te essttiin ng g T Th he e F Frryye err
Each Henny Penny open fryer was completely checked and tested prior to shipment.
However, it is good practice to check the unit for proper operation.