Important: Always read and follow the instructions.
• 15
tire
POSITION (OUTSIDE)
RIM POSITION (INSIDE)
Unbalance
Match Mount
Balance
The program allows total wheel out-of-balance to be reduced by compensating, when possible,
tire
and rim
out-of-balance values. It is suitable for static unbalance values in excess of 30 grams. It requires two runs,
rotating the
tire
on the rim on the second run.
1. Press:
If no unbalance was measured before, START appears on the display. Press this button to proceed.
if start from the guard is disabled,
MENU
) to perform a
Close the guard (and press the button
spin.
2. Make a reference mark on the flange and the rim (using a piece of chalk, for example). With the aid of a
tire
remover, turn the
tire
on the rim by 180°.
Refit the wheel in such a way that the reference marks on the rim and the flange coincid
e.
if start from the guard is disabled,
MENU
) to perform a
Close the guard (and press the button
spin.
3. RH display: percentage reduction value
LH display: actual static unbalance value which can be reduced by rotation
4. Mark the two positions of the rim and
tire
, and turn the
tire
on the rim until the positions coincide to
achieve the
optimization
shown on the display
.
When
optimization
is complete, perform a new spin or press
to return to the measurement screen.
