HENNESSY INDUSTRIES Coats 885, Инструкции по безопасности, Инструкции по установке, Инструкции по эксплуатации, Инструкции по обслуживанию

Страница: 18 / 32

12 • Important: Always read and follow the instructions.
BALANCING WITH A MIX OF ADHESIVE AND CLIP-ON WEIGHTS AND STATIC BALANCING
3
1
2
4
5
After dimension acquisition in standard balancing mode, pressing the buttons
you can select one of the following correction modes.
WEIGHT APPLICATION POSITION
Correction type Inside Outside
Clip-on weight at 12 o’clock Clip-on weight at 12 o’clock
Clip-on weight at 12 o’clock Adhesive weight at 12 o’clock
Adhesive weight at 12 o’clock Clip-on weight at 12 o’clock
Adhesive weight at 12 o’clock Adhesive weight at 12 o’clock
STATIC
Adhesive weight at 12 o’clock
After dimension acquisition in ALU mode, pressing the
3
1
2
buttons, you can select one of the
following correction modes. The adhesive weight application distance and diameter are measured by means of
the automatic gauge, except for the static unbalance where the dimensions acquired are modified following some
fixed parameters.
WEIGHT APPLICATION POSITION
Correction type Inside Outside
Adhesive weight at 12 o’clock Adhesive weight at 12 o’clock
Clip-on weight at 12 o’clock Adhesive weight at 12 o’clock
STATIC
Adhesive weight at 12 o’clock