10 •
Important: Always read and follow the instructions.
d1
d
E
BALANCING WITH ADHESIVE WEIGHTS (ALU)
Wheel dimensions setting
Using the dedicated grip, move the gauge tip up against the inside of the rim and make two consecutive measure-
ments starting from the inside (FI) as shown in the figure. The two preselected positions coincide with the point
where the counterweight is to be applied.
MENU - ACOUSTIC SIGNAL
), the acquisition of the dimensions is accompanied
If the acoustic signal is enabled (
by a “beep”.
Set the gauge to the
home
position.
The balanc
er
automatically interprets the presence of a rim with adhesive weight correction:
If the wheel dimensions have been entered incorrectly, the parameters can be modified without repeating the
balancing spin:
1. Press:
2. Set the value of the dimensions in sequence:
dI=inside weight distance
dE=outside weight distance
aI=inside weight distance
aE=outside weight distance
using the buttons
.
3. Press the button
to confirm the setting and go to the next dimension.
Press the button
at any time to interrupt dimension setting and return to the main screen.
