Operating Manual
Page 14
3.4. Temperature Measuring
Measuring range
0 - 100 °C
Accuracy, measuring amplifier
< 1 % of measuring range end value
Resolution
0.1 °C
3.5. Conductivity, Electrodless Measuring
Measuring range
0-2 mS, 0-20 mS, 0-200 mS, 0-2000 mS
configurable
Accuracy
< 1% of measuring range end value
Resolution
1 - 0.001 mS depending on measuring range
Temperature compensation
Manual: 0 - 100 °C
Automatic with NTC: 0 - 100 °C
Reference temperature: 25 °C
Temperature unit °C or °F
Calibration
with calibrating box, depending on measuring
range
Auto-read function for stable measured value
3.6. Conductivity, Contact Measuring
Measuring range
0-2 µS, 0-20 µS, 0-200 µS, configurable
Accuracy
< 1% of measuring range end value
Resolution
1 – 0.001 µS depending on measuring range
Temperature compensation
Manual: 0 - 100 °C
Automatic with PF100: 0 - 100 °C
Reference temperature 25 °C
Temperature unit °C or °F
Calibration
with calibration box, depending on measuring
range
Auto-read function for stable measured value
3.7. Standard Signal
Signal input terminal 1
0(4)-20 mA (Option: galvanic separation)
Signal input terminal 2
0(4)-20 mA (Option: galvanic separation)
Selection of display units
pH, redox (mV), mA, mV, conductivity,
Celsius, Fahrenheit
Selection of measuring ranges
Redox: 0 - 1000 mV or – 500 - + 500 mV
Celsius: 0 - 100 °C
Fahrenheit: 32 - 212 °F
3.8. Controller functions / Signal unit
Set-point value (W):
Measuring module range
Switch difference (XSD):
0 .. 30.0 %
ON delay:
0 .. 240 seconds
OFF delay:
0 .. 240 seconds
Switching point distance (LW):
± Measuring range
