Hendi 231845, Инструкция пользователя

Страница: 12 / 120

EN
12
STARTING
The machine starting with impulse is possible only
with a voluntary action on the control device fore-
seen for this aim : white button “I” for the machine
starting control.
STOP
For the stop control push the black button “O”. In
case of
temporary or prolonged stop , before to re-
place in function the machine, all fed products must
be taken away within the machine: follow the indica-
tions about the grinding group disassembly.
MANTAINED ACTION STARTING
The machine maintained action starting is possible
only
with a voluntary action on the control device
foreseen for this aim : white button “ ” for the
machine starting control. When the button releases
the machine stops.
VOLTAGE ABSENCE
In case of electric feeling break or if the machine is
disconnected from the electric net, this last one will
be able to be restarted only following the starting function, after the electric feeding back or the elec-
tric net refasten .
PRESSURE OPENING
Lifting the pressure for the handle, the machine
stops immediately for the entry in function of the
safety micro switch. The machine can be restarted
only lowing the pressure up to the height that doesn’t allow the introduction of the fingers towards the cut-
ting zone and following successively the starting
function.
MACHINE COVER REMOVAL
Slacking the block knob and removing the cover with
the hands, the machine stops immediately for the
entry in function of the safety micro switch. The ma- chine can be restarted only repositioning the ma-
chine cover and blocking it with the appropriate knob
and following successively the starting function.
CHECKS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CHECK MODALITY AND COMPARISONS
Check that:
• There aren’t on the machine,
within the loading mouths
and in correspondence of the
unloading mouth, product
exile zone, stranger objects
Sight control of the indicated parts, to check of objects or extraneous bodies
lacking as for example different tools, clothes, etc … and that there isn’t
however the food product.
In case of presence provide to their removal.
Check the cleaning:
• of the machine internal parts
• the cutting zone, the discs,
the machine cover internal
part, the unloading mouth
• the pressure and the pestle
• of the machine external
surface
All indicated parts surfaces, before the machine use must be checked visually
to verify their cleaning.
For the sight control of the cutting zone internal parts remove the superior
cover.
In case of molds presence or other type of dirtiness, provide with the cleaning
procedure in accordance with the charter 5 indications.