HemoCue 201 DM, Справочное руководство

Страница: 112 / 203

107
Patient ID (PID)
123456789
(James Smith)
FIGURE 4-5
This will not be displayed if the Patient List
setting is set to “Not Used” (see
3.4.1 General
Settings ), or the Patient ID requirement is set
to “Not Used”.
If the Patient List setting is set to “Used” and
there is a Patient List on the Analyzer that
contains the Patient ID and corresponding
Patient Name, this display will show the
Patient ID and corresponding Patient Name
as a means of positive patient identification.
If the Patient List doesn’t contain a Patient
Name corresponding to the entered Patient
ID, then the text
Unknown Patient Name will
be displayed.
h) Press OK to continue or the back arrow
to go back and re-enter the Patient ID.
Enter
Lab Number (LID)
123 ABC
FIGURE 4-6
This will not be displayed if the Lab ID
requirement is set to “Not Used” (see
3.4.2
Patient Test Settings ).
i) Enter the Lab Number (LID) either directly
on the Display via the Text mode and
Numeric mode buttons, or with the
Barcode Scanner via the Barcode Scanner
button.