HemoCue 201 DM, Справочное руководство

Страница: 105 / 203

100
FIGURE 3-84
Confirmation or cancellation of the transfer
of the desired setting (3) is required.
c) To initiate data transfer of the category
indicated (3) to the receiving Analyzer,
press Continue.
To cancel, press No.
d) If the process was initiated, the
connection will be established and the
following text will be displayed:
Transmitting via IR port …
3 Settings to transfer
e) If a connection was established
successfully and the transfer was
accepted by the receiving Analyzer (see
FIGURE 3-85 ), the same text will continue
to be displayed during data transfer.
When the transfer is completed, the
following text will be displayed for a few
seconds:
Transmission OK
and a beep will be heard if the audible
signal is enabled.
FIGURE 3-83 will be displayed.
f) If no connection was established or
transfer was rejected by the receiving
Analyzer, the following text will be
displayed:
No Connection With Compatible IR
Device
.
An error beep will be heard if the audible
signal is enabled. See section
Troubleshooting .
Press the Confirm button.
FIGURE 3-83 will be displayed.
Infra Red
All Settings
No No
Continue Continue
Are You Sure You
Want to Send the
Settings?
3