Hellenbrand ProMate-6.0, Руководство пользователя

Страница: 9 / 28

9
STEP 11S – Use up and down arrows to select number of gallons per relay activation
of regen gallon setting. Range = 0.1-100 gallons. Press NEXT to go to Step 12S.
Press REGEN to return to previous step.
STEP 12S – Use up and down arrows to set duration of relay activation in minutes.
Range = 0:01 (1 second) - 500:00 (500 minutes). Press NEXT to go to Step 20S.
Press REGEN to return to previous step.
RELAY 1 DURATION
RELAY 1 SETPOINT
➔
GAL
1.0
SET
SET
0:01
MIN
STEP 12S
STEP 11S
RELAY 1 SET POINT
➔
SET
1.0
GAL
RELAY 1 TRIGGER
➔
SET
REGEN
GAL
STEP 13S
RELAY 1 DURATION
SET
0:01
MIN
STEP 15S
STEP 14S
RELAY 1 SERV ALARM
➔
SET
TRIGGER
STEP 16S
RELAY 2 ERROR
➔
SET
TRIGGER
STEP 20S
STEP 20S –
Relay 2 programming includes identical options as Relay 1, with the addition of the
ability to trigger Relay 2 in Error Mode. Relay closes whenever control enters Error Mode and
immediately deactivates when error resolved and reset. Press NEXT to go to Step 21S.
RELAY 1 SETPOINT
➔
SET
-20
STEP 18S
MIN
RELAY 1 DURATION
➔
SET
70:00
STEP 19S
MIN
RELAY 1 TRIGGER
SET
OFF
STEP 17S
➔
STEP 14S – Use up and down arrows to select number of gallons per relay acti-
vation of regen gallon setting. Range 0.1 – 20,000 gallons. Press NEXT to go to
step 15S.
STEP 15S –
If Off or Time was selected in previous steps, this screen does not ap-
pear. Use up and down arrows to set duration of relay activation in minutes. Range
= 0:01 (1 second) - 500:00 (500 minutes). Press NEXT to go to Step 20S. Press
REGEN to return to previous step.
STEP 13S – If REGEN gallons chosen to activate relay. Relay activates after set number of
gallons have been used in service or during regeneration and then deactivates after set period
of time or after flow stops, whichever comes first. Meter reads during regeneration. Press
NEXT to go to Step 14S.
STEP 18S
Use up or down arrows to select minutes of relay activation. Range -20 – 500 minutes.
Press NEXT to select duration of relay activation.
STEP 19S
Use up or down arrows to select duration of relay activation. Range = 0:01
(1 second) - 500:00 (500 minutes). Press NEXT to go to Relay 2 programming.
STEP 16S –
Service Alarm chosen to activate relay, relay closes whenever Service Alarm
has triggered. Programming for relay closure on service reminder is done on Step 21S. Relay
opens when service alarm reset. Press NEXT to go to Step 20S to set Relay 2 Settings.
• Relay closes on Gallons
• Relay closes on Time
• Relay closes on Both
• Off, Factory setting is off
STEP 17S –
Relay Triggered for Lockout, relay is activated for set number of minutes into
regeneration including negative numbers to delay regeneration starting. Range -20 to 500
minutes. Regen is also an option for lockout. Relay initiates 2 minutes prior to regen and com-
pletes 2 minutes after regen for REGEN setting. Access setting by scrolling through negative
numbers. Press NEXT to Set Start Time.
➔
➔