15
DRAIN LINE - 3/4”
DRAIN LINE - 1”
Systems are shipped without 3/4” nut for drain elbow (polytube
installation only) and 5/8” polytube insert (polytube installation only).
1
15-H4615
Elbow Locking Clip
1
2-8
15-V3008-02
Drain Ftg, 1” Straight Assy.
1
3*
15-V3166
Drain Ftg Body, 1”
1
4*
15-V3167
Drain Ftg Adapter, 1”
1
5*
15-V3163
O-ring 019
1
6*
15-V3163
Split Ring
1
7*
15-V3151
Nut, 1” QC
1
8*
15-V3105
O-ring 215
1
9
15-V3190-090
DLFC 9.0 gpm for 1”
15-V3190-100
DLFC 10.0 gpm for 1”
One
15-V3190-110
DLFC 11.0 gpm for 1”
DLFC
15-V3190-130
DLFC 13.0 gpm for 1”
must be
15-V3190-150
DLFC 15.0 gpm for 1”
used if
15-V3190-170
DLFC 17.0 gpm for 1”
1” fitting
15-V3190-200
DLFC 20.0 gpm for 1”
is used
15-V3190-250
DLFC 25.0 gpm for 1”
QTY.
ITEM NO.
ORDER NO.
DESCRIPTION
See System Specifications DLFC on page 18, for correct DLFC
size for your unit.
See System Specifications DLFC on page 18, for correct DLFC size for
your unit.
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to
unscrew the nut or cap. Do not use a pipe wrench to tighten or loosen nuts
or caps. Do not place screwdriver in slots on caps and/or tap with a
hammer.
Do not use pipe dope or other sealants on threads. Teflon tape must be
used on threads of the 1” NPT connection and on the threads for the drain
line connection. Teflon tape is not necessary on the nut connection nor
caps because of o-rings seals.
Figure 17
Figure 18
1
15-H4615
Elbow Locking Clip
1
2
15-PKP10TS8
Polytube Insert, 5/8”
Optional
3
15-V3192
Nut, 3/4” Drain Elbow
Optional
4-6
15-V3158-01
Drain Elbow 3/4” Male Assy
1
4-6
15-V3158-02
Drain Elbow 3/4” Male Assy-No Vent Optional
5
15-V3163
O-ring 019
1
6
15-V3159-01
DLFC Retainer Assy.
1
7
15-V3162-007
DLFC 0.7 gpm for 3/4”
1
15-V3162-010
DLFC 1.0 gpm for 3/4”
15-V3162-013
DLFC 1.3 gpm for 3/4”
One
15-V3162-017
DLFC 1.7 gpm for 3/4”
DLFC
15-V3162-022
DLFC 2.2 gpm for 3/4”
must
15-V3162-027
DLFC 2.7 gpm for 3/4”
be used
15-V3162-032
DLFC 3.2 gpm for 3/4”
if 3/4
15-V3162-042
DLFC 4.2 gpm for 3/4”
fitting
15-V3162-053
DLFC 5.3 gpm for 3/4”
is used
15-V3162-065
DLFC 6.5 gpm for 3/4”
15-V3162-075
DLFC 7.5 gpm for 3/4”
15-V3162-090
DLFC 9.0 gpm for 3/4”
15-V3162-100
DLFC 10.0 gpm for 3/4”
QTY.
ITEM NO.
ORDER NO.
DESCRIPTION
Rounded Edge
This Side
Rounded Edge
This Side
All manuals and user guides at all-guides.com
