Hella APS-R, Руководство по установке и настройке

Страница: 10 / 65

3 Structure and function
3.1 Hardware
1
2
2
3
4 5 6 7
Fig. 2: Hardware APS-R/APS-R-PoE
1 I/O-interface (D-SUB)
2 Fixing points (2 x 2 M5)
3 HDR camera
4 Status LED
5 HDR camera
6 Ethernet interface (M12)
7 Ground stud (metric thread M5)
For detailed information about the interfaces,
Ä
Chapter 4.2 “Hardware interface specifications”
on page 18.
Starting the device takes about 40 seconds. During this time the
status LED is as follows:
n When the device starts the LED is illuminated in red for approx-
imately 25 sec.
n After the basic system start is finished, the LED goes off for
approximately 15 sec.
n If the device is ready to use, the LED is illuminated in green for
approximately 3 sec.
User interface is accessible approximately 10 sec later.
APS-R, APS-R-PoE
Status LED
Structure and function
Hardware
10 09.06.2017
The reproduction, distribution and utilization of this document as well as the communication of its contents to others
without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.