Hella Induperm CCR 961-SW4.00, Руководство пользователя

Страница: 27 / 53

CCR961 MANUAL-GB
27
Version B2:01-07-2015

Press

24 times to see ”Calibration of watch” in the display

Press

and the value for ”Hours” will start flashing

Use the push-buttons 0 – 9 to enter the desired value for hour

Press ”E”

Press

and the value for ”Minutes” will start flashing

Use the push-buttons 0 – 9 to enter the desired value for minutes

Press ”E”

Press

and the value for ”Day” will start flashing

Use the push-buttons 0 – 9 to enter the desired value for day

Press ”E”

Press

and the value for ”Month” will start flashing

Use the push-buttons 0 – 9 to enter the desired value for month

Press ”E”

Press

and the value for ”Year” will start flashing

Use the push-buttons 0 – 9 to enter the desired value for year (2 last digits)

Press ”E”

Press

some seconds to get to the menu for ”Store data”

Press ”E”
3.9
How to change the language in the display

The Key switch is turned to position ”Manual”

Press ”E”

Enter the code for User Menu

Press ”E”

Press

18 times to see ”Language” or “Sprache” in the display

Press

-push buttons to select the desired language

Press

some seconds to get to the menu for ”Store data”

Press ”E”
3.10
I How to set up the name of the series circuit (f.i. RCL L1)

The Key switch is turned to position ”Manual”

Press ”E”

Enter the code for User Menu

Press ”E”

Press

19 times to see ”CCR Name” in the display
The CCR Name (or more correctly the name of the series circuit) is constructed as follows:
XXXX Z1 Z2 Z3 Z4, where:
XXXX can be selected among the following terms:
APH-APL-RSR-THR-PAPI-REH-REL-RWE-RCL-TDZ-TXC-TXE-STB-RGL-TXS-SPEC!
Each of the digits Z1, Z2, Z3 and Z4 can be selected between the following:
0-9, L, -, space,
If the option SPEC! is selected for XXXX each digit (all together) can be given an ASCII
value.