13.2 Defective modules
Unless input power is down all LEDs on each module should be green (see section 9, page 24). No light, orange light , red or
flashing light are abnormal conditions. Refer to section 10.2, page 27 to collect and record module information. If no fix can be
found, replace module.
13.2.1 Replacing modules
Refer to section 11, page 28 to remove and re-insert modules.
13.2.2 Return defective T2S interface
A T2S totally dark (indication area) or that cannot interface with your laptop are evidence of failure. Proceed as per section 13.2.4,
page 36.
13.2.3 Return defective shelf
The shelf is passive. Failure is unlikely to happen. In turn defective situation are barely always visible. After depose proceed as per
section 13.2.4, page 36.
13.2.4 Return defective modules
A repair request should follow the regular logistics chain:
End-user => Distributor => CE+T Power.
Before returning a defective product, a RMA number must be requested through the
http://my.cet-power.com extranet. Repair registering guidelines may be requested by
email at [email protected].
The RMA number should be mentioned on all shipping documents related to the repair.
Be aware that products shipped back to CE+T Power without being registered first will
not be treated with high priority!
Information on failure occurrence as well as module status given through Menu 2-1 shall
be attached to defective unit return package or recorded in RMA.
36
– Bravo ST 230 VAC– User manual – v7.3
Содержание BRAVO ST 230 VAC
Страница 39: ......
