Helios Power Solutions BRAVO ST 230 VAC, Руководство пользователя

Страница: 26 / 39

10. System set up
Bravo ST 230 VAC System is delivered with default set of parameters referred as factory settings.
Upon various site operating conditions or Site Manager requirements some parameters might have to be adjusted.
Refer to “TSI T2S 120VAC User Manual Vx_x” for detailed description of system status reading and changing as well as parameter
adjustment.
 Parameter set up requires Hyper terminal installed on laptop
 USB cable type A to B (not included)
 T2S driver “CET_T2S.inf” installed on laptop.
 Available for download:
- On my.CET for direct customers, in the “Document” section.
- At the following URL for everyone else:
http://www.cet-power.com/uploads/Driver_T2S/Driver_T2S_for_Windows_and_hyperterminal.zip.
 Read T2S manual for detailed setup.
10.1 Communication Setting
 Bits per second 115200
 Data bits 8
 Parity None
 Stop bits 1
 Flow control None
Remark: Refer to document XXXX for detailed system setting and operation.
26 – Bravo ST 230 VAC– User manual – v7.3
System set up