Helios Power Solutions BRAVO ST 230 VAC, Руководство пользователя

Страница: 24 / 39

9. Human-Machine Interface
9.1 Inverter module (Requires firmware V203 or higher)
=
~
=
=
=
~
AC out
DC in
AC in
Inverter Status Output Power Status
Inverter Status LED Description Remedial action
OFF No input power or forced stop Check environment
Permanent green Operation
Blinking green
Converter OK but working conditions
are not fulfilled to operate properly
Blinking green/orange alternatively
Recovery mode after boost
(10 In short circuit condition)
Permanent orange Starting mode
Blinking orange Modules cannot start
Check T2S configuration or Module with wrong
firmware. Need firmware V203 or higher.
Blinking red Recoverable fault
Permanent red Non recoverable fault Send module back for repair
Output Power (redundancy not counted)
<5%
5% to
40%
40 to
70%
80 to
95%
100%
100% =
overload
Output Power (redundancy not counted)
× × ×
Status output power LED × ×
×
1B 1P 2P 2P 3P 3B Behaviour (B = blinking – P permanent )
24 – Bravo ST 230 VAC– User manual – v7.3
Human-Machine Interface