Helion Avenge 10MT XLR, Руководство пользователя и техническая информация

Страница: 11 / 38

11
2. Place your Avenge and ET3 transmitter in close proximity but not less than 12”
(300mm) apart.
300mm
3. Press and hold the PAIR / BIND button on the receiver then switch the receiver
on. The receiver’s LED will flash to indicate that it is in PAIR / BIND mode.
4. Press and hold the PAIR / BIND button on the transmitter then switch the
transmitter on. Release the PAIR / BIND button only when the transmitter’s LED
begins flashing.
5. When the LED on the receiver lights solid red your ET3 transmitter and Avenge
will be bound. You will now have full control of throttle and steering. Return to
Step 11 of this guide to complete the set-up of your car.