9
6. Remove the battery cover from the underside of the ET3 transmitter and
insert 4 AA alkaline batteries. Take care to ensure that the correct polarity
is observed.
7. Ensure the radio switch is in the OFF position, then connect the battery to
the ESC.
8. Replace the body and secure it with the four body clips.
9. Switch ON your IKONNIK ET3 transmitter and ensure the LED is lit solid red
and that no alarms are audible. Ensure that the CH2 EPA dials are turned
fully clockwise and that the D/R (steering rate) dial is centered. Ensure,
also, that the CH1 and CH2 (trim) dials are centered at zero.
LED
CH2 EPA
D/R
CH1 &
CH 2
Trim
Содержание Avenge 10MT XLR
Страница 1: ...Owner s Manual Technical Information ...
Страница 38: ...www Helion RC com ...