Heinzmann Programmer 2, Руководство пользователя

Страница: 36 / 57

5 Configuring the Governor with the Hand Held Programmer
30
Programmer PG 02
5.5 User Masks
5.5.1 General
From level 4 upward, the user is granted access to a great number of the governor's
parameters. To facilitate access and survey, the possibility of creating user masks has
been provided. Any desired parameter can be readily allocated to a user mask. With the
user mask activated, only the allocated parameters will be displayed. In order to take
advantage of this function the hand held programmer must have been programmed to
level 4 at least.
5.5.2 Activating and Deactivating the User Mask
MASK
ON/OFF
With this key, the user mask is activated or deactivated. If the user mask is
activated and no parameter has been programmed for inclusion in the user mask, the
message "No parameter in mask" will be issued. If a parameter has been programmed
for the user mask, this will be indicated by displaying "Mask" at the end of the third
line. If the user mask is deactivated, the third line will read "on" or "off". These
messages indicate whether the specified parameter has been programmed for inclusion
in the user mask ("on") or not ("off"). On powering up the hand held programmer, the
mask is activated by default.
5.5.3 Creating and Deleting User Masks
ON/OFF
BEGIN LIST
With this key, the selected parameter is assigned to the mask or removed from
it. If the user mask is already activated, the current parameter is deleted from the user
mask, and the following parameter is displayed. With the user mask activated, a
parameter can be directly programmed for inclusion in the user mask by means of the
key [NUMBER].
To delete a user mask completely, the user mask is to be activated first with
the third line reading "MASK" as described before. Then, the key
[ON/OFF] is to be pressed so many times until the message "No parameter
in mask" appears.
In the same way as any value changes, programming the masks will take
place only in the governor's volatile memory. If the results of programming
are to be made permanent, the function [SAVE DATA] must be executed.
Note