Heinzmann Programmer 2, Руководство пользователя

Страница: 15 / 57

3 Parameterization of HEINZMANN Speed Governors
Programmer PG 02
9
3 Parameterization of HEINZMANN Speed Governors
3.1 Possibilities of Parameterization
There exist various possibilities of parameterizing HEINZMANN Digital Controls. For
testing and initial commissioning HEINZMANN recommend using the PC software
DcDesk 2000 as a tool for diagnostics and parameterization. DcDesk 2000 can also be
used for servicing purposes where, in addition, the Hand Programmers PG 02 and HP 03
are available.
The below list gives an overview of all available options of parameterization:
Š Parameterization by HEINZMANN
During final inspection at the factory, the functionability of the control is checked by
means of a test programme. If customer specific operational data is available, the test
programme is executed using those data. When mounted on the engine, it is only the
dynamic values and, if necessary, the fuel quantity limitations and the sensors that
remain to be calibrated.
Š Parameterization Using the Hand Programmer
Depending on the level, parameterization can be completely conducted using the Hand
Programmers PG 2 or HP
3. These handy devices are particularly suited for
maintenance and servicing.
Š Parameterization by DcDesk 2000
Using the PC programme DcDesk 2000, it is possible to have several parameters
continuously displayed and accessible to modification. Besides, the PC-programme is
capable of graphically displaying limitation curves, characteristics, etc., and of
adjusting them easily and quickly. The control data can be stored by the PC or
downloaded from the PC to the control. A further advantage of the PC programme is
its ability to visualize measured values (such as speed, injection quantity) as functions
of time or as functions of each other (e.g., actuator position versus speed).
Š
Parameterization with User Masks
Parameterization can always be conducted by means of user masks that are provided
by HEINZMANN or can easily be created by the user himself. A user mask will
display only those parameters that are really needed.
Š Downloading Data Sets
Once parameterization has been completed for a specific engine type and its
application, the data set can be stored within the Hand Programmer or on a disk. For
future applications of the same type, any such data sets can be readily downloaded to
the new controls.