Electronically controlled injection (MVC) will in addition require
to observe the following:
With
Common Rail
systems a separate mechanical flow limiter must
be provided for each injector pipe.
With
Pump-Pipe-Nozzle (PPN)
and
Pump Nozzle (PNE)
systems fuel
release may be enabled only by the movement of control piston of the
solenoid valve. This is to inhibit fuel from being delivered to the
injection nozzle in case of seizure of the control piston.
The examples, data and any other information in this manual are
intended exclusively as instruction aids and should not be used in any
particular application without independent testing and verification by
the person making the application.
Independent testing and verification are especially important in any
application in which malfunction might result in personal injury or
damage to property.
HEINZMANN make no warranties, express or implied, that the
examples, data, or other information in this volume are free of error,
that they are consistent with industry standards, or that they will meet
the requirements for any particular application.
HEINZMANN expressly disclaim the implied warranties of
merchantability and of fitness for any particular purpose, even if
HEINZMANN have been advised of a particular purpose and even if a
particular purpose is indicated in the manual.
HEINZMANN also disclaim all liability for direct, indirect, incidental
or consequential damages that result from any use of the examples,
data, or other information contained in this manual.
HEINZMANN
make no warranties for the conception and engineering
of the technical installation as a whole. This is the responsibility of the
user and of his planning staff and specialists. It is also their
responsibility to verify whether the performance features of our devices
will meet the intended purposes. The user is also responsible for correct
commissioning of the total installation.
Warning
Warning
Danger
