HEIDENHAIN TNC 620 E, Руководство пользователя

Страница: 144 / 840

Fundamentals, File Management | Fundamentals
4
144
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Basic coordinate system B-CS
The basic coordinate system is a 3-D Cartesian coordinate system.
Its coordinate origin is the end of the kinematics model.
The orientation of the basic coordinate system in most cases
corresponds to that of the machine coordinate system. There may
be exceptions to this if a machine manufacturer uses additional
kinematic transformations.
The kinematic model and thus the position of the coordinate
origin for the basic coordinate system is defined by the machine
manufacturer in the machine configuration. The user cannot modify
the machine configuration values.
The basic coordinate system serves to determine the position and
orientation of the workpiece coordinate system.
W-CS
B-CS
Soft key Application
The user determines the position and orientation
of the workpiece coordinate system by using a 3-
D touch probe for example. The control saves the
values determined with respect to the basic coordi-
nate system as
BASE TRANSFORM.
values in the
preset management.
The machine tool builder configures the
BASE TRANSFORM.
columns of the preset management
in accordance with the machine.
Further information: "Managing presets", page 644
NOTICE
Danger of collision!
Your control may feature an additional pallet preset table,
depending on the machine. In this table the machine tool builder
can define
BASE TRANSFORM.
values that take effect before
the
BASE TRANSFORM.
values you specify in the preset table
become effective. The
PAL
tab of the expanded status display
indicates whether a pallet preset is active, and which one. Since
the
BASE TRANSFORM.
values of the pallet preset table are
neither visible nor editable, there is danger of collision during all
movements!
Refer to the machine tool builder's documentation
Use pallet presets only in conjunction with pallets
Check the display of the
PAL
tab before you start machining