Hedensted Gruppen HG Combi Cut, Руководство пользователя

Страница: 8 / 55

Telephone 0045 75891244
- for professionel farmes
8
5. Setup of the Combi Cut.
The HG slicing machine has to be placed on a solid and plane floor, so
that the machine can be operated standing or sitting on a special chair.
The height of the room must minimum be 3,00 cm.
The legs of the machine have to be adjusted, so that it stands in level and
is steady without tipping. After setup you can remove the transport fittings
on the legs of the machine by help of the 4 bolts, if they annoy the user.
Notice that the weight of the machine is 300 kg.
Attention: Keep the transport fittings, if the machine has to removed.
5.1 Connection
Electricity:
The HG Combi Cut is fit with a 16A CEE-socket to which 400 volt is
connected with zero and earth. The machine has a maximum power
consumption on 2,9Amp during running.
Air:
The slicing machine demands a
compressor pressure on min. 7 bar,
and an air supply on min. 500 l/min.
The air is connected with an air
coupling of the Cejn 320.
To avoid stop in the slicing, it is
important that the air, which is used
in the slicing machine is free of
water and dirt, as well as rust from
old pipes.
Warning: The moveable parts will react quickly by connection of air.
Air tube and electric cable must not lay loose on the floor, because of risk
of personal damage.
AIR IN
OUT 3x400V